¿Qué downlights LED con clasificación IP son adecuados para el baño?

The bathroom is one of the most important places in a home, and it’s important to make sure that it’s well-lit. Traditionally, people have used incandescent bombillas in the bathroom, but they’re becoming increasingly unpopular because they produce a lot of heat and waste a lot of energy. LED downlights are a better option for the bathroom because they don’t produce any heat and use much less energy. Bathroom-led downlights are very bright and can be used to light up the entire room. They are also very energy-efficient, which means saving money on electricity bills. But the main question is- what IP rating for bathroom downlights is best to use?

¿Por qué necesita luces empotradas LED con clasificación IP para el baño?

Hay muchas razones por las que los downlights LED con clasificación IP son importantes en el baño. La razón más obvia es la seguridad. El sistema de clasificación IP se utiliza para calificar el nivel de protección que tiene un dispositivo eléctrico contra objetos sólidos y agua. Las clasificaciones van de IP0 a IP68. IP0 significa que el dispositivo no ofrece ninguna protección, mientras que IP68 significa que el dispositivo está completamente protegido contra el polvo y puede sumergirse en agua hasta por 30 minutos.

Most bathroom fixtures have an IP rating of IP44 or IP45. This means that they are protected against water splashes from any direction. However, if the fixture is installed in a location where it is likely to be hit by water from a high-pressure hose (such as a car wash), it should have IP67 or higher.

¿Qué significa la clasificación IP?

1. Ingress Protection Rating: How Does It Relate To Product Quality

Un IP rating (Ingress Protection rating) is an international standard that assigns a number to the degree of protection an electronic device has against solid objects and liquids. The rating is usually two digits, with the first digit representing protection against solid objects and the second digit representing protection against liquids.

2. El significado del código (protección contra objetos sólidos, protección contra el ingreso de líquidos)

El sistema de clasificación IP consta de dos letras y dos números. Las letras indican el nivel de protección contra sólidos, mientras que los números indican protección contra líquidos. Cuanto mayor sea el primer número, mayor será la protección contra objetos sólidos. Cuanto mayor sea el segundo número, mayor será la protección contra líquidos. Por ejemplo, una carcasa con una clasificación IP de 65 sería más resistente a la intrusión de objetos sólidos y líquidos que una carcasa con una clasificación IP de 44.

Estos números se derivan de la siguiente serie:

Primer Dígito (Cuerpos Extraños):

• There is no protection.
• Protected against solid objects larger than 50mm in size or larger parts of the body (e.g., a hand), but not against deliberate access.
• Give protection to solid objects larger than 12mm in diameter or small body parts like a finger.
• Protected from entry by tools, wires, etc., of diameter larger than 2.5mm.
• Protected from solid objects that are larger than 1mm.
• Although there is limited protection against dust, it gives full protection from the physical contact of internal parts.
• Completely dust-free.

Segundo Dígito (Líquido):

• There is no protection.
• Complete Protection of condensation.
• Protection from water droplets is equal to 3mm per minute.
• Complete protection from spraying water at 60 degrees from the vertical.
• Water splash protection in any direction.
• Can withstand water jets from all directions at low pressure.
• Can withstand strong jets of water coming from any direction.
• Temporary immersion (30 minutes) at a depth not exceeding 1 meter.
• Seal sealed. High-pressure, long-lasting immersion.

Puede que no resulte muy claro elegir entre tantas opciones. Es posible que una carcasa electrónica que ofrezca protección completa contra partículas no ofrezca protección contra la humedad. Simplemente haga coincidir los números.

Focos empotrables LED para baño IP44

IP44 LED downlight is a specific type of LED light fixture designed for use in bathrooms. They are classified as IP44 because they are protected from water splashes in all directions. This makes them perfect for use in areas like the shower or bathtub, where water is more likely to be splashed around.

IP44 bathroom downlights come in a wide variety of styles and colors, and are the perfect one to match bathroom decor. They are also very energy-efficient, and save money on energy bills by using them.

Focos empotrables LED para baño IP45

IP45 LED bathroom downlights are a great way to save energy and add some style to the bathroom at the same time. These lights use less than half the energy of a standard light bulb, and they come in a variety of different styles to match any bathroom décor. They use only 9 watts of power, much less than traditional light bulbs. These lights are rated for IP45, which means they are protected from water jets. This makes them a perfect choice for bathrooms with showers or baths. 

Focos empotrables LED para baño IP54 

Estas luces tienen una clasificación IP54, lo que significa que están protegidas contra el agua y el polvo. También son muy eficientes energéticamente, ya que utilizan sólo 6 vatios de potencia. Esto es aproximadamente 60% menos que una bombilla incandescente estándar.

Focos empotrables LED para baño IP55

IP55 LED bathroom downlights are a type of light fixture designed for use in bathrooms. They are classified as IP55 lights because they are protected against dust and water jets. This means that they can be installed in areas with a moderate amount of moisture without fear of damage. IP55 LED bathroom downlights are also dust resistant, which means that they can be used in areas with a high level of dust or dirt. This makes them a great option for outdoor areas, such as patios and decks.

Focos empotrables LED para baño IP64

Los downlights LED para baño IP64 son una excelente manera de mejorar la apariencia y funcionalidad del baño. Estas luces están clasificadas para uso tanto en interiores como en exteriores, lo que las hace perfectas para usar en baños, pasillos y otras áreas del hogar que necesitan un poco de luz adicional.

Focos empotrables LED para baño IP65 

IP65 LED bathroom downlights are a great choice for areas prone to water damage. The IP65 downlights mean that the lights are protected against jets of water from any direction, making them ideal for use in bathrooms, kitchens, and other areas where moisture is present. Additionally, the LED bulbs used in these lights provide superior energy efficiency and a longer lifespan than traditional incandescent bulbs.

Downlights LED para baño IP67 

Los Downlights LED para baño IP67 son una excelente opción para cualquiera que busque un dispositivo de iluminación duradero y de calidad. Las luces son resistentes al agua y al polvo, lo que las hace perfectas para usar en baños, cocinas y otras áreas donde pueda haber humedad o suciedad. Además, la iluminación LED proporciona una fuente de luz extremadamente eficiente y duradera.

Downlights LED para baño IPx4 

IPx4 LED bathroom downlights are a sealed, water-resistant light fitting that can be installed in bathrooms, showers, and other wet areas. The IPx4 rating means that the light is protected against water splashing from any angle, making it ideal for use in wet areas. The tecnología LED provides high quality, energy-efficient lighting, and the downlights are available in a range of finishes to match any decor.

¿Qué downlights LED con clasificación IP son adecuados para baños?

¿Qué clasificación IP para downlights en el baño?

Los baños deben cumplir requisitos estrictos en cuanto a la clasificación IP. Las duchas se dividen en tres zonas: zona 0, zona 1 y zona 2.

• La zona 0 es para platos de ducha y bañeras. Estas áreas estarán sumergidas en agua y requerirán una clasificación IPx7.
• La zona 1 incluye paredes de ducha y baños. IPx4 es mejor para estas áreas
• La zona 2 está ubicada encima del lavabo, la ducha y la bañera. Estas áreas requieren una clasificación IPx4 ya que aún podría salpicar agua.

Conclusión

LED downlights are one of the best choices for general lighting. They are energy-efficient, durable, and come in various shapes and sizes. One of the best features of LED downlights is that they can be installed in various locations, including recessed cans, iluminación de la pista, and sconces. This article has looked at the IP rating system and what IP rating for downlights in bathrooms is suitable. It is important to select the right downlights for the bathroom to ensure they are waterproof and can handle moisture levels. To purchase high-quality IP-rated LED downlights, Visite nuestro sitio web.