工作場所的照明對空間的功能性和安全性有很大影響。

採光良好 keeps your employees healthy and safe from unwanted accidents.

Working places like construction sites and manufacturing facilities often have bad vision rates.

The workers do not see things properly due to dust and particles in the area. This causes severe accidents.

And you may end up dealing with hospital bills and lawsuits. In such situations, OSHA steps in.

OSHA stands for Occupational Safety and Health Administration.

It is an organization that ensures that your workplace is safe and has proper light sources.

OSHA lighting standards 1910 are designed to ensure that workplaces are adequately lit to promote safety, efficiency, and worker health. 

這裡， 沃蘭 將引導您了解 OSHA 工業公司照明標準。

一英尺燭光的意思是什麼？

The measuring unit or component of OSHA is known as the Foot Candle.

If you want to know more about what exactly OSHA standards are, then you should learn about Foot candles.

It is a unit of measurement used to quantify light intensity.

It means that it calculates the amount of light that falls on a surface area. The formula to calculate foot-candle is:

Foot-Candle = Lumen / Square Foot.

Where lumen is the total amount of visible light emitted by a light source.

Another unit to measure light intensity is lux (lx), which is calculated as follows:

Lux = Lumen / Square Meter

OSHA requires adequate lighting through the set quantities for these measurement units to ensure workplace safety.

OSHA 推薦的辦公室照明級別

Light has a great influence on workers’ ability to see computer screens.

A good amount of light helps workers to see computers easily.

At the same time, inappropriate light causes eye strain in employees while working.

The level of 辦公室所需的燈光 與其他工作場所所需的光線有很大不同。

以下是 OSHA 推薦的指南： 辦公室照明:

  1. 在每個工作桌上使用檯燈和任務燈。
  2. 在窗戶上安裝百葉窗和窗簾。它可以保護您的地方免受明亮、閃亮的光線的影響。
  3. 將電腦和螢幕放在窗戶的另一側，光線不會照射到螢幕上。
  4. 在天花板和牆壁上塗上霧面和淺色，以柔化光反射並降低對比度。

工作場所照明標準：最低限度

Guided by the recommendations from the American National Standards Institute (ANSI) and the Illuminating Engineering Society (IES), OSHA has set the following lighting levels: 

General construction area lighting needs a minimum of 5-foot candles.

Shops and plants need at least the brightness of 10-foot candles.

The minimum level of brightness standard varies for various construction workplaces:

  1. 醫務室及急救場所：30 ft-c
  2. 出口、走道和倉庫：10 英尺-c
  3. 隧道和地下豎井：5 ft-c
  4. 廢棄物區、儲存區、裝載平台和加油區：3 ft-c

In common commercial places, the minimum lighting requirements are as follows

  1. 陳列室、辦公室和實驗室：500 lux
  2. 車間和工廠：750 lux
  3. 倉庫和裝卸區：300-400 lux
  4. Stairwells, corridors, and lobbies: 200 lux
  5. 倉庫過道：100-200 lux

OSHA Lighting Requirements

OSHA 燈指示防護板的覆蓋要求是必要的 所有類型的燈具.

此外，燈具必須有防護罩，以防止意外事件發生。 

Particularly areas where light fixtures have a chance of getting damaged.

The same advice goes for pull boxes, fittings, and junction boxes.

遵循 OSHA 照明標準的優勢

OSHA workplace lighting standards basically present multiple benefits.

It significantly enhances work productivity.

Moreover, a comfortable and serene environment enhances the employee’s mood.

Ultimately, it will increase work productivity and positive results.

All of these factors combine together and bring productivity.

OSHA standards ensure that your workplace adheres to all rules for minimum lighting required.

Safety should be your priority in your workplace.

Because it determines the reputation of your company as a brand and you as an employer.

Additionally, no one wants to collaborate with a firm that does not have any security.

They always feel unsafe while working with you.

不遵守 OSHA 照明標準的風險

如果該公司不遵守 OSHA 照明規則，OSHA 檢查員將對其處以罰款。

The companies have to deal with the following penalty amounts in this case:

  1. $16,131 costs if you do a serious violation of the rules
  2. $16,131 per day if you fail to Abate previous violation
  3. $161,323 costs if you repeat the violation

不遵守 OSHA 照明規則的公司還必須面臨支付大筆費用的其他風險。

  1. 首先，工人或僱員的人身傷害或非正常死亡可以提起責任訴訟。其次，各領域檢查、引用頻繁。
  2. Thirdly, boycotts from regular authorities like DOL or EPA
  3. 該公司聲譽不佳，導致合約取消、專案損失以及進一步合作的抵制。

You have to remember that you and your contractors both follow the OSHA lighting standards.

Their negligence also results in your fall.

Moreover, the process of managing contractors’ compliance takes time.

But now we have contractor compliance software, which makes the process easy and efficient.

OSHA 照明安裝要求

這 1910.305 職業安全與健康管理局 標準提出了照明安裝要求。

The rules and regulations for permanent and temporary 燈具 are the same.

The ground conductors of light must safely be grounded.

Do not use ducts that have flammable vapors or dust to install any kind of wirings.

Moreover, the temporary lights under 600 volts must follow the safety rules more closely.

They should only be utilized in repair, remodeling, or emergency work.

任務和緊急照明

任務燈經過專門設計，可將光線指向特定區域。

此外，標準 1910 也管理緊急燈的使用。

Most of the standard rules for general lights and emergency lights are the same.

The only difference is that temporary installation of light above 600 volts is used in emergency works, tests, or temporary construction tasks.

OSHA 照明標準保護工人

The safety lighting standards of OSHA protect employees.

It ensures that the workplace has enough illumination to prevent injuries and accidents.

OSHA safety lighting standards protect the worker by the following:

危害識別

Proper lighting in a workplace ensures that the worker has visibility.

It protects workers from getting injuries due to obstacles, equipment malfunctions, and spills from the lack of visibility.

而且， good lighting 還可以讓工作人員識別緊急情況並快速做出反應。

防止受傷

If the workplace does not have proper lighting, it will increase the chances of injuries and accidents.

Inadequate lighting makes it difficult for employees to see the areas clearly.

Additionally, the OSHA lighting standards guarantee that there should be enough brightness in the workplace.

So people can easily see and protect them from unwanted injuries and accidents.

Lighting the Way: A Manufacturing Facility’s Journey to Compliance

In the heart of industrial America, a mid-sized manufacturing facility faced a common challenge: outdated lighting that dimmed productivity and raised safety concerns.

The journey to compliance with OSHA lighting standards wasn’t just about ticking boxes; it was about turning a dimly lit workspace into a beacon of efficiency and safety.

挑戰

Workers strained to see in poorly lit areas, leading to errors and accidents.

The existing fluorescent lighting was inefficient, casting uneven shadows and hiking up energy costs.

解決方案

The facility embarked on a comprehensive lighting overhaul.

The key to the transformation was the switch to LED lighting, which was chosen for its energy efficiency and longevity.

Task-specific lighting was installed at workstations, ensuring precise tasks could be performed safely and effectively.

Overhead LEDs brightened common areas, while motion sensors and dimmable options added layers of efficiency and control.

結果

The results were illuminating. Not only did the facility meet OSHA’s stringent lighting standards, but it also saw a significant drop in workplace accidents.

Workers reported less eye strain and higher satisfaction with their improved environment.

Energy costs plummeted thanks to the efficiency of LED技術.

結論

The OSHA light standard ensures that your workplace has a functional and safe environment.

It keeps the workers safe from any unwanted accidents.

Moreover, It must be difficult to comply with all the rules and regulations in a workplace.

However, it is essential for a safe working place.

Therefore, make sure to get help from Vorlane to make your compliance management easier and faster. 聯絡我們 現在！

精彩的！分享這個案例：