OSHA 조명 표준은 무엇이며 왜 중요한가요?

작업장의 조명은 공간의 기능성과 안전성에 큰 영향을 미칩니다.

좋은 조명 keeps your employees healthy and safe from unwanted accidents.

Working places like construction sites and manufacturing facilities often have bad vision rates.

The workers do not see things properly due to dust and particles in the area. This causes severe accidents.

And you may end up dealing with hospital bills and lawsuits. In such situations, OSHA steps in.

OSHA stands for Occupational Safety and Health Administration.

It is an organization that ensures that your workplace is safe and has proper light sources.

OSHA lighting standards 1910 are designed to ensure that workplaces are adequately lit to promote safety, efficiency, and worker health. 

여기, 볼레인 산업체를 위한 OSHA의 조명 표준에 대해 안내합니다.

풋 캔들의 의미는 무엇입니까?

The measuring unit or component of OSHA is known as the Foot Candle.

If you want to know more about what exactly OSHA standards are, then you should learn about Foot candles.

It is a unit of measurement used to quantify light intensity.

It means that it calculates the amount of light that falls on a surface area. The formula to calculate foot-candle is:

Foot-Candle = Lumen / Square Foot.

Where lumen is the total amount of visible light emitted by a light source.

Another unit to measure light intensity is lux (lx), which is calculated as follows:

Lux = Lumen / Square Meter

OSHA requires adequate lighting through the set quantities for these measurement units to ensure workplace safety.

OSHA에서 사무실에 권장하는 조명 수준

Light has a great influence on workers’ ability to see computer screens.

A good amount of light helps workers to see computers easily.

At the same time, inappropriate light causes eye strain in employees while working.

The level of 사무실에 필요한 조명 다른 직장에서 필요한 조명과는 많이 다릅니다.

다음은 OSHA에서 권장하는 지침입니다. 사무실 조명:

1. 각 작업 테이블에는 책상 조명과 작업 조명을 사용하세요.
2. 창문에는 블라인드와 커튼을 설치하세요. 밝고 빛나는 빛으로부터 장소를 보호합니다.
3. 빛이 스크린에 떨어지지 않는 창 반대쪽에 컴퓨터와 스크린을 배치하십시오.
4. 천장과 벽에 무광택 마감재와 밝은 색상을 적용하여 빛 반사를 부드럽게 하고 대비를 줄입니다.

작업장 조명 표준: 최소 제한

Guided by the recommendations from the American National Standards Institute (ANSI) and the Illuminating Engineering Society (IES), OSHA has set the following lighting levels: 

General construction area lighting needs a minimum of 5-foot candles.

Shops and plants need at least the brightness of 10-foot candles.

The minimum level of brightness standard varies for various construction workplaces:

1. 의무실 및 응급처치 장소: 30ft-c
2. 출구, 통로 및 창고: 10ft-c
3. 터널 및 지하 수갱: 5ft-c
4. 폐기물 구역, 보관 구역, 적재 플랫폼 및 연료 보급 구역: 3ft-c

In common commercial places, the minimum lighting requirements are as follows

1. 전시실, 사무실, 실험실: 500럭스
2. 작업장 및 공장: 750럭스
3. 창고 및 적재 공간: 300-400lux
4. Stairwells, corridors, and lobbies: 200 lux
5. 창고 통로: 100-200럭스

OSHA Lighting Requirements

OSHA 표시등의 커버 요구 사항은 보호 플레이트가 필요함을 나타냅니다. 모든 종류의 조명기구.

또한 조명기구에는 원치 않는 사건으로부터 보호하기 위한 보호막이 있어야 합니다. 

Particularly areas where light fixtures have a chance of getting damaged.

The same advice goes for pull boxes, fittings, and junction boxes.

OSHA 조명 표준 준수의 이점

OSHA workplace lighting standards basically present multiple benefits.

It significantly enhances work productivity.

Moreover, a comfortable and serene environment enhances the employee’s mood.

Ultimately, it will increase work productivity and positive results.

All of these factors combine together and bring productivity.

OSHA standards ensure that your workplace adheres to all rules for minimum lighting required.

Safety should be your priority in your workplace.

Because it determines the reputation of your company as a brand and you as an employer.

Additionally, no one wants to collaborate with a firm that does not have any security.

They always feel unsafe while working with you.

OSHA 조명 표준을 준수하지 않을 경우의 위험

OSHA 조사관은 회사가 OSHA 조명 규칙을 따르지 않을 경우 회사에 벌금을 부과합니다.

The companies have to deal with the following penalty amounts in this case:

1. $16,131 costs if you do a serious violation of the rules
2. $16,131 per day if you fail to Abate previous violation
3. $161,323 costs if you repeat the violation

OSHA 조명 규칙을 준수하지 않는 회사는 조명 조명에 막대한 비용을 지불해야 하는 다른 위험에도 직면해야 합니다.

1. 첫째, 근로자나 직원의 개인적인 부상이나 부당한 사망에 대한 책임 소송이 가능합니다. 둘째, 다양한 분야에서 빈번한 점검과 인용이 존재한다.
2. Thirdly, boycotts from regular authorities like DOL or EPA
3. 회사의 평판이 좋지 않아 계약이 취소되고, 프로젝트가 손실되며, 추가 협력에 대한 보이콧이 발생합니다.

You have to remember that you and your contractors both follow the OSHA lighting standards.

Their negligence also results in your fall.

Moreover, the process of managing contractors’ compliance takes time.

But now we have contractor compliance software, which makes the process easy and efficient.

OSHA 조명 설치 요구 사항

그만큼 1910.305 OSHA 표준은 조명 설치 요구 사항을 제시합니다.

The rules and regulations for permanent and temporary 조명기구 are the same.

The ground conductors of light must safely be grounded.

Do not use ducts that have flammable vapors or dust to install any kind of wirings.

Moreover, the temporary lights under 600 volts must follow the safety rules more closely.

They should only be utilized in repair, remodeling, or emergency work.

작업 및 비상 조명

작업 조명은 조명이 특정 영역을 향하도록 특별히 설계되었습니다.

또한 표준 1910은 비상 조명 사용을 관리합니다.

Most of the standard rules for general lights and emergency lights are the same.

The only difference is that temporary installation of light above 600 volts is used in emergency works, tests, or temporary construction tasks.

OSHA 조명 표준은 근로자를 보호합니다

The safety lighting standards of OSHA protect employees.

It ensures that the workplace has enough illumination to prevent injuries and accidents.

OSHA safety lighting standards protect the worker by the following:

위험 식별

Proper lighting in a workplace ensures that the worker has visibility.

It protects workers from getting injuries due to obstacles, equipment malfunctions, and spills from the lack of visibility.

게다가, good lighting 또한 작업자가 긴급 상황을 파악하고 신속하게 대응할 수 있도록 해줍니다.

부상 예방

If the workplace does not have proper lighting, it will increase the chances of injuries and accidents.

Inadequate lighting makes it difficult for employees to see the areas clearly.

Additionally, the OSHA lighting standards guarantee that there should be enough brightness in the workplace.

So people can easily see and protect them from unwanted injuries and accidents.

Lighting the Way: A Manufacturing Facility’s Journey to Compliance

In the heart of industrial America, a mid-sized manufacturing facility faced a common challenge: outdated lighting that dimmed productivity and raised safety concerns.

The journey to compliance with OSHA lighting standards wasn’t just about ticking boxes; it was about turning a dimly lit workspace into a beacon of efficiency and safety.

도전

Workers strained to see in poorly lit areas, leading to errors and accidents.

The existing fluorescent lighting was inefficient, casting uneven shadows and hiking up energy costs.

해결책

The facility embarked on a comprehensive lighting overhaul.

The key to the transformation was the switch to LED lighting, which was chosen for its energy efficiency and longevity.

Task-specific lighting was installed at workstations, ensuring precise tasks could be performed safely and effectively.

Overhead LEDs brightened common areas, while motion sensors and dimmable options added layers of efficiency and control.

결과

The results were illuminating. Not only did the facility meet OSHA’s stringent lighting standards, but it also saw a significant drop in workplace accidents.

Workers reported less eye strain and higher satisfaction with their improved environment.

Energy costs plummeted thanks to the efficiency of LED 기술.

결론

The OSHA light standard ensures that your workplace has a functional and safe environment.

It keeps the workers safe from any unwanted accidents.

Moreover, It must be difficult to comply with all the rules and regulations in a workplace.

However, it is essential for a safe working place.

Therefore, make sure to get help from Vorlane to make your compliance management easier and faster. 문의하기 지금!