Что такое стандарты освещения OSHA и почему они имеют значение?

Освещение на рабочем месте имеет большое влияние на функциональность и безопасность пространства.

Хорошее освещение keeps your employees healthy and safe from unwanted accidents.

Working places like construction sites and manufacturing facilities often have bad vision rates.

The workers do not see things properly due to dust and particles in the area. This causes severe accidents.

And you may end up dealing with hospital bills and lawsuits. In such situations, OSHA steps in.

OSHA stands for Occupational Safety and Health Administration.

It is an organization that ensures that your workplace is safe and has proper light sources.

OSHA lighting standards 1910 are designed to ensure that workplaces are adequately lit to promote safety, efficiency, and worker health. 

Здесь, Ворлейн расскажет вам о стандартах освещения OSHA для промышленных компаний.

Что означает свеча для ног?

The measuring unit or component of OSHA is known as the Foot Candle.

If you want to know more about what exactly OSHA standards are, then you should learn about Foot candles.

It is a unit of measurement used to quantify light intensity.

It means that it calculates the amount of light that falls on a surface area. The formula to calculate foot-candle is:

Foot-Candle = Lumen / Square Foot.

Where lumen is the total amount of visible light emitted by a light source.

Another unit to measure light intensity is lux (lx), which is calculated as follows:

Lux = Lumen / Square Meter

OSHA requires adequate lighting through the set quantities for these measurement units to ensure workplace safety.

Уровни освещения, рекомендованные OSHA для офисов

Light has a great influence on workers’ ability to see computer screens.

A good amount of light helps workers to see computers easily.

At the same time, inappropriate light causes eye strain in employees while working.

The level of свет, который нужен в офисе сильно отличается от света, который вам нужен на другом рабочем месте.

Ниже приведены рекомендации OSHA для офисное освещение:

1. Используйте настольную лампу и рабочее освещение на каждом рабочем столе.
2. Установите на окна жалюзи и шторы. Он защищает ваше место от яркого, блестящего света.
3. Размещайте компьютеры и экраны на противоположной стороне окна, где свет не попадает на экраны.
4. Нанесите матовую отделку и светлые тона на потолки и стены, чтобы смягчить отражение света и уменьшить контраст.

Стандарты освещения рабочего места: минимальное ограничение

Guided by the recommendations from the American National Standards Institute (ANSI) and the Illuminating Engineering Society (IES), OSHA has set the following lighting levels: 

General construction area lighting needs a minimum of 5-foot candles.

Shops and plants need at least the brightness of 10-foot candles.

The minimum level of brightness standard varies for various construction workplaces:

1. Лазареты и пункт первой помощи: 30 футов
2. Выходы, проходы и склады: 10 футов куб.
3. Туннели и подземные шахты: 5 футов куб.
4. Площадки для мусора, складские помещения, погрузочные платформы и зоны заправки: 3 фута куб.

In common commercial places, the minimum lighting requirements are as follows

1. Выставочные залы, офисы и лаборатории: 500 люкс.
2. Мастерские и фабрики: 750 люкс
3. Склады и погрузочные площадки: 300-400 люкс.
4. Stairwells, corridors, and lobbies: 200 lux
5. Складские проходы: 100-200 люкс

OSHA Lighting Requirements

Требования к освещению OSHA указывают на то, что защитные пластины необходимы для все виды светильников.

Кроме того, светильники должны иметь защитный экран, защищающий их от нежелательных событий. 

Particularly areas where light fixtures have a chance of getting damaged.

The same advice goes for pull boxes, fittings, and junction boxes.

Преимущества следования стандартам освещения OSHA

OSHA workplace lighting standards basically present multiple benefits.

It significantly enhances work productivity.

Moreover, a comfortable and serene environment enhances the employee’s mood.

Ultimately, it will increase work productivity and positive results.

All of these factors combine together and bring productivity.

OSHA standards ensure that your workplace adheres to all rules for minimum lighting required.

Safety should be your priority in your workplace.

Because it determines the reputation of your company as a brand and you as an employer.

Additionally, no one wants to collaborate with a firm that does not have any security.

They always feel unsafe while working with you.

Риски несоблюдения стандартов освещения OSHA

Инспекторы OSHA штрафуют компанию, если она не соблюдает правила освещения OSHA.

The companies have to deal with the following penalty amounts in this case:

1. $16,131 costs if you do a serious violation of the rules
2. $16,131 per day if you fail to Abate previous violation
3. $161,323 costs if you repeat the violation

Компании, которые не соблюдают правила освещения OSHA, также сталкиваются с другими рисками, связанными с необходимостью платить огромные деньги за

1. Во-первых, возможны иски об ответственности за телесные повреждения или неправомерную смерть рабочего или служащего. Во-вторых, в различных областях присутствуют частые проверки и цитаты.
2. Thirdly, boycotts from regular authorities like DOL or EPA
3. У компании плохая репутация, что приводит к расторжению контрактов, потере проектов и бойкотам дальнейшего сотрудничества.

You have to remember that you and your contractors both follow the OSHA lighting standards.

Their negligence also results in your fall.

Moreover, the process of managing contractors’ compliance takes time.

But now we have contractor compliance software, which makes the process easy and efficient.

Требования OSHA к установке освещения

The 1910.305 ОША Стандарт представляет требования к установке освещения.

The rules and regulations for permanent and temporary светильники are the same.

The ground conductors of light must safely be grounded.

Do not use ducts that have flammable vapors or dust to install any kind of wirings.

Moreover, the temporary lights under 600 volts must follow the safety rules more closely.

They should only be utilized in repair, remodeling, or emergency work.

Рабочее и аварийное освещение

Рабочие светильники специально разработаны для направления света на определенную область.

Кроме того, Стандарт 1910 регулирует использование аварийного освещения.

Most of the standard rules for general lights and emergency lights are the same.

The only difference is that temporary installation of light above 600 volts is used in emergency works, tests, or temporary construction tasks.

Стандарты освещения OSHA защищают работников

The safety lighting standards of OSHA protect employees.

It ensures that the workplace has enough illumination to prevent injuries and accidents.

OSHA safety lighting standards protect the worker by the following:

Идентификация опасности

Proper lighting in a workplace ensures that the worker has visibility.

It protects workers from getting injuries due to obstacles, equipment malfunctions, and spills from the lack of visibility.

Более того, good lighting также позволяет работникам идентифицировать чрезвычайную ситуацию и быстро отреагировать на нее.

Предотвратить травмы

If the workplace does not have proper lighting, it will increase the chances of injuries and accidents.

Inadequate lighting makes it difficult for employees to see the areas clearly.

Additionally, the OSHA lighting standards guarantee that there should be enough brightness in the workplace.

So people can easily see and protect them from unwanted injuries and accidents.

Lighting the Way: A Manufacturing Facility’s Journey to Compliance

In the heart of industrial America, a mid-sized manufacturing facility faced a common challenge: outdated lighting that dimmed productivity and raised safety concerns.

The journey to compliance with OSHA lighting standards wasn’t just about ticking boxes; it was about turning a dimly lit workspace into a beacon of efficiency and safety.

Соревнование

Workers strained to see in poorly lit areas, leading to errors and accidents.

The existing fluorescent lighting was inefficient, casting uneven shadows and hiking up energy costs.

Решение

The facility embarked on a comprehensive lighting overhaul.

The key to the transformation was the switch to LED lighting, which was chosen for its energy efficiency and longevity.

Task-specific lighting was installed at workstations, ensuring precise tasks could be performed safely and effectively.

Overhead LEDs brightened common areas, while motion sensors and dimmable options added layers of efficiency and control.

Исход

The results were illuminating. Not only did the facility meet OSHA’s stringent lighting standards, but it also saw a significant drop in workplace accidents.

Workers reported less eye strain and higher satisfaction with their improved environment.

Energy costs plummeted thanks to the efficiency of светодиодная технология.

Заключение

The OSHA light standard ensures that your workplace has a functional and safe environment.

It keeps the workers safe from any unwanted accidents.

Moreover, It must be difficult to comply with all the rules and regulations in a workplace.

However, it is essential for a safe working place.

Therefore, make sure to get help from Vorlane to make your compliance management easier and faster. Связаться с нами сейчас!